Tel/WhatsApp
0086-135 2669 2320
How do we ensure the safety of our tyre recycling plant when operation?
1. What's the safety design of our tyre recycling plant which can buffer the pressure itself?
The ellipsoidal head has a strong tension and buffering when pressure generated. And it can better connect with the reactor body, therefore cannot be easily cracked under high pressure.From the below picture, you can see our reactor has ellipsoidal head, which is an obvious symbol for pressure vessel.
Boiler head
2.How to prevent oil gas flow back to keep safe pressure of the whole system?
For tyre recycling plant, after heating there is oil gas produced and run through all the system of the plant to be cooling down to liquid oil. But how can we keep the oil gas only go ahead cannot go back to the reactor, and then cause accident? If any workers have any wrong operation and make the oil gas flow back, there would be very dangerous. So to prevent this dangerous situation happen, we designed the following safety devices: vacuum system, oil-water separator and water seals.
Safety device 01
3.How can we avoid the high pressure generated before accident happens?
Below you can check there are some safety devices of our tyre recycling plant, such as pressure gage, pressure valve, alarm bell, temperature panel. If wrong operation cause high pressure, the alarm bell will ring immediately. If there is no worker beside, the pressure valve can open automatically.If there are workers beside, the workers can open the pressure valve manually.
Safety device 02
4.Do we have safety production certificates for tyre recycling plant?
1). CE certificate
2).Certificates for pressure vessel design and production:
Safety production certifications
